| M4-34P4 Rotek Slewing Ring Bearings | manufacturer product page:Click here; single or double cup:Single Cup; finish/coating:Uncoated; cup width:0.8750 in; material:Case Carburized Stee; manufacturer upc number:4547359534511; D:5.2500 in; fillet radius:0.13 in; lubrication hole type:No Hole; |
| RKS. 211440101001 SKF Slewing Ring Bearings | d:50mm; Seals or Shields:Open Type; B:7mm; Availability:In Stock; Fatigue Load Rating (kN):0.335; Oil Limiting Speed (r/min):30000; Preload:Light; Dynamic Load Rating (kN):7.41; Static Load Rating (kN):7.8; Weight:0.05 KGS; SKU:71810cd/p4dga-skf; D:65mm; Grease Limiting Speed (r/min):20000; Cage Type:Plastic; Clearance:Standard; |
| RKS.060.20.0944 SKF Slewing Ring Bearings | RG:3/4 NPT; Cap bolt, SAE grade:5; A1:171.45 mm; Cap bolt:4 x 3/4-10 UNC; P90°:140 kN; Mass pillow block:125 kg; End plug (suffix Y):EPR 18; Da:309.999 mm; A2:307.975 mm; J max.:549.275 mm; Stabilizing ring:SR-34-0; Taconite seal:TER 141; Pa:43.6 kN; H2:69.85 mm; R1:115.888 mm; P180°:92.5 kN; R2:37.306 mm; PG:1/4 NPT; P120°:85.9 kN; Max. speed for Taconite seal:520 r/min; |
| A12-35N5 Rotek Slewing Ring Bearings | Cap bolt recommended tightening torque:813.5 N·m; Da:289.999 mm; Max. speed for PosiTrac Plus seal:1050 r/min; Housing:SSAFS 532; PG:1/4 NPT; A1:158.75 mm; H2:66.675 mm; ba:70.644 mm; PosiTrac Plus contact element:2 x B10724-130; Mass pillow block:132 kg; Ca:89.789 mm; Cap bolt:7/8-9 UNC; Initial grease fill:793.8 g; h:51.594 mm; S:4.763 mm; Eye bolt:2 x 3/8-16 UNC; H:338.137 mm; Stabilizing ring:SR-32-0; |
| A14-25P1 Rotek Slewing Ring Bearings | Clearance:C3; Cage Type:Plastic; Weight:0.02 KGS; D:100mm; SKU:1309ektn9/c3-skf; Reference Speed Rating (r/min):12000; Seals or Shields:Open Type; Static Load Rating (kN):13.4; d:45mm; Dynamic Load Rating (kN):39; Limiting Speed Rating (r/min):8500; Fatigue Load Rating (kN):0.7; Availability:In Stock; B:25mm; |
| A8-25N2 Rotek Slewing Ring Bearings | material:Steel; finish:Polished; diameter:1-11/16 in; grade:O1; length:3 ft; meets industry standards by:ASTM, SAE; industry standards met:SAE J-437, ASTM A-68; |
| A10-35N1L Rotek Slewing Ring Bearings | outer ring type:Not Split; D:160 mm; operating temperature range:-30 of +200 &de; lubrication hole type:Lubrication Groove &; bore type:Tapered 1:12; outer ring width:40 mm; finish/coating:Uncoated; cage type:Outer Ring Guided; series:222; maximum rpm:4800 RPM; application:Vibratory Applicatio; precision rating:Not Rated; closure type:Open; static load capacity:375000 N; dynamic load capacity:345000 N; |
| L6-25N9Z Rotek Slewing Ring Bearings | B:96 mm; D1 ≈:150 mm; Fatigue load limit Pu:68 kN; H max.:65 mm; b:10.2 mm; C:94 mm; Basic static load rating C0:550 kN; Basic dynamic load rating C:457 kN; Maximum dynamic radial loads Fr max.:335 kN; K:6; d:90 mm; Mass bearing:20.5 kg; D:220 mm; r min.:2.3 mm; Maximum static radial loads F0r max.:480 kN; d1 ≈:120 mm; |
| M5-31P1Z Rotek Slewing Ring Bearings | compatible shaft diameter:3.0000 in; finish / coating:Gray Paint; bearing style:Spherical Flange Blo; expansion type:Converts from Non-Ex; misalignment angle:1-1/2 °; locking device:Set Screw; seal type:Labyrinth Teflon; operating temperature range:200° °F; flange mounting type:Four-Bolt Square; lubricant:#2 Lithium; application:General Industrial; maximum rpm:2400 rpm; manufacturer upc number:662798836812; |
| H8-54N1 Rotek Slewing Ring Bearings | standards met:RoHS, REACH, DRC Con; overall length:3 in; series:SS; bearing material:Sintered Bronze Oil-; material specification:CT-1000-K26, SAE841; sleeve bearing type:Plain Sleeve; harmonization code:848330; iso grade:9001:2008 &; D:1-7/8 in; d:1-1/2 in; |