| L163110CD Timken Tapered Roller Bearings | Initial grease fill:3515.4 g; Eye bolt:2 x 1/2-13 UNC; End plug (suffix Y):X-5217-2; Da:419.999 mm; J max.:749.3 mm; A2:315.119 mm; L:869.95 mm; H1:250.825 mm; Housing:SAF 056 KAUB; P90°:271 kN; Appropriate attachment bolt size G:1.5 in; P180°:185 kN; Cap bolt:4 x 1 1/2-6 UNC; H2:101.6 mm; A1:228.6 mm; J1:139.7 mm; Mass pillow block:316 kg; J min.:666.75 mm; Cap bolt, SAE grade:5; N1:41.275 mm; |
| 7100S/07196D Timken Tapered Roller Bearings | L:174.625 mm; A1:88.106 mm; B:85.725 mm; Attachment bolt diameter G:15.875 mm; J:136.525 mm; S:0.794 mm; A:69.85 mm; d2:101.6 mm; s:31.75 mm; Limiting speed:3100 r/min; A6:25.4 mm; Basic dynamic load rating C:148 kN; da:63.5 mm; Mass bearing unit:7.76 kg; a:2.381 mm; N1:17.462 mm; A5:34.131 mm; |
| NA357/353D Timken Tapered Roller Bearings | r1,2 min.:1.1 mm; Mass housing washer:0.53 kg; D:110 mm; B:10.5 mm; D1:62 mm; |
| K16896 Timken Tapered Roller Bearings | B:29.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Basic Static Radial Load Rating Co:61000 N; Oil Speed Rating Open/Shielded n2:5900 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:78100 N; Accessories:One Shield & Snap-Ri; d:45.000 mm; |
| NA13687/13621D Timken Tapered Roller Bearings | Basic Interchange SPLIT:-; Basic Interchange NSK:X549RS; Basic Interchange:-; Accessories:Mast Guide Type- 307; Basic Interchange MCGILL:-; Basic Radial Load Rating-Static SCO:48600 lbf; Basic Interchange NDH:-; Basic Interchange BCA:MG307FFK; Basic Radial Load Rating-Dynamic DC:13600 lbf; |
| M231647/M231616XD Timken Tapered Roller Bearings | Labyrinth ring:2 x LOR 114; H2:44.45 mm; Initial grease fill:181.44 g; PG:1/4 NPT; A2:155.575 mm; L:387.35 mm; P150°:58.7 kN; H1:114.3 mm; J max.:333.375 mm; h:40.481 mm; Mass pillow block:39 kg; A1:111.125 mm; P60°:175 kN; da:107.95 mm; P120°:64.9 kN; P180°:71.2 kN; Cap bolt recommended tightening torque:298.3 N·m; Da:180 mm; Cap bolt:5/8-11 UNC; Appropriate attachment bolt size G:0.75 in; |
| NP835117 Timken Tapered Roller Bearings | Dynamic (Cr):4.5 mm; with tapered bore:3 000 min-1; D:160 mm; d:75 mm; B:55 mm; rs (min):2.1 mm; Grease:489 kN; Static (Cor):8.3 mm; with cylindrical bore:2 300 min-1; Pu:396 kN; Oil:56.460 kN; |
| NA285160/285228D Timken Tapered Roller Bearings | Fatigue load limit Pu:465 kN; Minimum axial load factor A:3.9; Basic dynamic load rating C:1100 kN; d1:577 mm; Mass bearing:32.5 kg; r1,2 min.:2.1 mm; H:60 mm; B:17.5 mm; d:480 mm; Limiting speed:630 r/min; D:580 mm; Basic static load rating C0:6950 kN; Reference speed:320 r/min; D1:483 mm; ra max.:2 mm; Da max.:505 mm; da min.:555 mm; |
| K516800R Timken Tapered Roller Bearings | r1s (min):2.5 mm; Static (Coa):630 kN; D:200 mm; Pu:66.730 kN; B:53 mm; rs (min):3 mm; d2:110 mm; r2s (min):1 mm; a:46 mm; T:56 mm; Dynamic (Ca):433 kN; C:46 mm; |
| NA482/472D Timken Tapered Roller Bearings | d:480 mm; B2:217 mm; Mass withdrawal sleeve:34 kg; Hydraulic nut:HMV 100 E; G:Tr 500x5; B1:205 mm; d1:460 mm; A:9 mm; G2:G 1/4; G1:38 mm; |