| NA82587/82932D Timken Tapered Roller Bearings | Accessories:One Seal; D:72.0000 mm; d:35.000 mm; B:17.00 mm; Grease Speed Rating n1:9000 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; Oil Speed Rating n2:11000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:15300 N; Basic Dynamic Radial Load Rating C:25500 N; Grease Speed Rating Open/Shielded n1:9000 rpm; Sealed Speed Rating n3:6300 rpm; |
| HM231149NA/HM231116D Timken Tapered Roller Bearings | Ca:49.809 mm; h:38.1 mm; Stabilizing ring:SR-18-15; Da:160 mm; PG:1/8 NPT; Cap bolt:1/2-13 UNC; Labyrinth ring:2 x LOR 189; R2:27.781 mm; H2:41.275 mm; P180°:64.9 kN; da:82.55 mm; End plug (suffix Y):EPR 11; Cap bolt recommended tightening torque:149.1 N·m; P60°:157 kN; Initial grease fill:141.75 g; J1:53.975 mm; Max. speed for PosiTrac Plus seal:1800 r/min; N1:19.05 mm; Appropriate attachment bolt size G:0.625 in; |
| K167198 Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:11400 N; B:15.9 mm; Grease Speed Rating n1:12000 rpm; Basic Static Radial Load Rating Co:6800 N; Accessories:No Shield, no Seal; D2R:33.200 mm; Oil Speed Rating n2:17000 rpm; d:15.000 mm; Sealed Speed Rating n3:12000 rpm; D:35.0000 mm; Fillet Radius ra:0.64 mm; |
| K154138-B Timken Tapered Roller Bearings | Basic static load rating C0:3250 kN; d1 ≈:666 mm; Mass bearing (including seat washer where applicable):45.5 kg; da min.:623 mm; d:560 mm; Basic dynamic load rating C:475 kN; Limiting speed:800 r/min; Reference speed:600 r/min; H:67 mm; Fatigue load limit Pu:49 kN; ra max.:2.5 mm; r1,2 min.:3 mm; D:670 mm; Minimum load factor A:55; D1 ≈:564 mm; Da max.:607 mm; |
| NA329115/329173CD Timken Tapered Roller Bearings | Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:48800 N; D:85.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:6700 rpm; d:45.000 mm; Accessories:One Seal; B:30.20 mm; Basic Static Radial Load Rating Co:39000 N; Sealed Speed Rating n3:5000 rpm; |
| K518771R Timken Tapered Roller Bearings | Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7 m/s; D:95 mm; Specific static load factor K0:120 N/mm²; Tolerance shaft:f7 m/s; Mass bushing:0.53 kg; Permissible sliding velocity v max.:1 m/s; d:90 mm; B:90 mm; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:40 N/mm²; |
| K166963 Timken Tapered Roller Bearings | Limiting speed:2800 r/min; Fw:160 mm; Ew:170 mm; Basic static load rating C0:510 kN; Basic dynamic load rating C:145 kN; Mass needle roller and cage assembly:0.55 kg; U:46 mm; Fatigue load limit Pu:56 kN; Reference speed:2600 r/min; |
| NA28138/28318D Timken Tapered Roller Bearings | Mass bushing:1.2 kg; d:75 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; D:90 mm; B:100 mm; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; |
| M272710CD Timken Tapered Roller Bearings | D:420 mm; D1:304 mm; B:28.5 mm; Mass housing washer:15.2 kg; r1,2 min.:3 mm; |
| K161769W Timken Tapered Roller Bearings | l2 max.:244 mm; dk:66 mm; l7 min.:58 mm; Basic static load rating C0:245 kN; C1 max.:31 mm; Material constant KM:330; l1 min.:104 mm; G:M 45x3; α:6 °; d2 max.:114 mm; Mass rod end:3.3 kg; Basic dynamic load rating C:156 kN; r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; d:50 mm; B:35 mm; h:185 mm; |