| 182351D Timken Tapered Roller Bearings | Mass bearing:191 kg; r1,2 min.:1.5 mm; d:431.8 mm; Comparative axial load rating CFa:266 kN; r3,4 min.:3.3 mm; D1 ≈:517 mm; Calculation factor Y1:1.25; Calculation factor e:0.54; Basic static load rating C0:10000 kN; Thrust factor K:1.07; Design variant/feature:TQOSN/GWSI; d1 ≈:460 mm; Basic dynamic load rating C:4650 kN; Comparative radial load rating CF:980 kN; T:279.4 mm; Fatigue load limit Pu:800 kN; |
| 2872/02823D Timken Tapered Roller Bearings | Reference speed:1100 r/min; Mass bearing:155 kg; ra max.:4 mm; Basic dynamic load rating C:2860 kN; K:9 mm; D:500 mm; F:351 mm; Calculation factor kr:0.32; b:16.7 mm; Limiting speed:1400 r/min; B:200 mm; d:300 mm; r1,2 min.:5 mm; da min.:320 mm; da max.:344 mm; D1 ≈:442 mm; Fatigue load limit Pu:455 kN; Da max.:480 mm; s max.:7.3 mm; Design variant/feature:NNU K30/W33; |
| NP281709 Timken Tapered Roller Bearings | D1 ≈:69.9 mm; Limiting speed:11000 r/min; d2 ≈:52.4 mm; d1:35 mm; Reference speed:8000 r/min; B1:36 mm; Ca min.:0.3 mm; Da max.:73 mm; Mass bearing + sleeve:0.69 kg; Misalignment factor k1:0.093; B:23 mm; r1,2 min.:1.1 mm; D:80 mm; Fatigue load limit Pu:10.2 kN; B2:13 mm; Ba min.:5 mm; db min.:44 mm; ra max.:1 mm; s1 max.:7.1 mm; da max.:52.4 mm; |
| 243251D Timken Tapered Roller Bearings | Calculation factor Y0:2.5; b:13.9 mm; da max.:191 mm; D:290 mm; ra max.:2.5 mm; D1 ≈:250 mm; Limiting speed:2800 r/min; Da max.:276 mm; B:80 mm; d1:140 mm; r1,2 min.:3 mm; B1:119 mm; Basic dynamic load rating C:1043 kN; Reference speed:2000 r/min; Basic static load rating C0:1290 kN; d3:210 mm; d2 ≈:191 mm; Ba min.:14 mm; Fatigue load limit Pu:118 kN; Mass bearing + sleeve:29.3 kg; |
| NA438/432D Timken Tapered Roller Bearings | b1:6 mm; D1 ≈:148.5 mm; Calculation factor kr:0.5; K:3.5 mm; Basic static load rating C0:800 kN; Basic dynamic load rating C:512 kN; Reference speed:1800 r/min; Limiting speed:2200 r/min; Da max.:161 mm; rb max.:1 mm; r3,4 min.:1 mm; d1 ≈:127.5 mm; Fatigue load limit Pu:95 kN; das:124 mm; ra max.:2 mm; d:110 mm; Mass bearing:6.32 kg; D:170 mm; r1,2 min.:2 mm; da min.:120 mm; |
| K161678W Timken Tapered Roller Bearings | Recommended diameter for attachment bolts, mm G:14 mm; RG:1/4-28 UNF; Recommended tightening torque for grub screw:16.5 N·m; Thread grub screw G2:M10x1; L:137 mm; Mass bearing unit:2.1 kg; B1:56.3 mm; T:58.9 mm; J7:33.5 mm; Hexagonal key size for grub screw N:5 mm; A1:14 mm; s1:34.9 mm; N4:4 mm; A:39 mm; A3:3.2 mm; Basic dynamic load rating C:33.2 kN; J6:123 mm; Basic static load rating C0:21.6 kN; |
| K516800R Timken Tapered Roller Bearings | Specific dynamic load factor K:100 N/mm²; dk:115 mm; Basic dynamic load rating C:490 kN; M:5 mm; Specific static load factor K0:500 N/mm²; b1:9.5 mm; Da min.:112.9 mm; rb max.:1 mm; Sealing solution:Triple-lip seals; Design (sliding contact surface combination):Steel/steel, heavy-d; r2 min.:1 mm; b:9.5 mm; da min.:97.4 mm; D:130 mm; Basic static load rating C0:2450 kN; α:5 °; Mass plain bearing:2.75 kg; |
| NA82576/82932D Timken Tapered Roller Bearings | Permissible sliding velocity v min.:0 m/s; B:35 mm; a:3 mm; α:124 °; Coefficient of friction µ min.:0.08; Tolerance housing:H7; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; h:29 mm; D:40 mm; Specific dynamic load factor K:25 N/mm²; d:28 mm; Mass bushing:0.2 kg; Permissible sliding velocity v max.:0.5 m/s; Specific static load factor K0:45 N/mm²; |
| NA97450/97901D Timken Tapered Roller Bearings | Specific dynamic load factor K:100 N/mm²; Material constant KM:330; Basic static load rating C0:270 kN; B:35 mm; r1 min.:0.6 mm; Basic dynamic load rating C:156 kN; d2 max.:114 mm; d:50 mm; h1:160 mm; l4 max.:219 mm; l3 min.:68 mm; Mass rod end:4.1 kg; C1 max.:31 mm; dk:66 mm; w:60 mm; l7 min.:60 mm; α:6 °; l5 ≈:30 mm; G:M 45x3; d4 ≈:70 mm; |
| 239228XD Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:30200 N; Grease Speed Rating n1:18000 rpm; Fillet Radius ra:1.00 mm; d:35.000 mm; Oil Speed Rating n2:29000 rpm; D:62.0000 mm; Basic Static Radial Load Rating Co:26500 N; B:28.00 mm; Fillet Radius rb:0.30 mm; |