| K518419R Timken Tapered Roller Bearings | B:9.00 mm; Basic Static Radial Load Rating Co:2360 N; Oil Speed Rating n2:30000 rpm; d:10.000 mm; Grease Speed Rating n1:24000 rpm; Fillet Radius ra:0.64 mm; Accessories:Two Shields & Snap-R; D:30.0000 mm; Sealed Speed Rating n3:17000 rpm; Grease Speed Rating Open/Shielded n1:24000 rpm; Oil Speed Rating Open/Shielded n2:30000 rpm; Basic Dynamic Radial Load Rating C:5070 N; |
| K168078 Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:156000 N; d:100.000 mm; B:56.00 mm; Oil Speed Rating n2:3800 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; D:160.0000 mm; Basic Static Radial Load Rating Co:190000 N; Grease Speed Rating n1:3100 rpm; |
| K518419R Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:225000 N; Basic Static Radial Load Rating Co:228000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4000 rpm; Grease Speed Rating n1:3100 rpm; D:160.0000 mm; d:75.000 mm; Fillet Radius rb:1.00 mm; B:74.00 mm; |
| K159547 Timken Tapered Roller Bearings | F:265 mm; Mass inner ring:4.6 kg; B:60 mm; r, r1,2 min.:2 mm; d:240 mm; |
| NA17098/17245D Timken Tapered Roller Bearings | A5:32.5 mm; Recommended diameter for attachment bolts, mm G:12 mm; H:93 mm; H1:47.6 mm; s1:25.4 mm; Housing material:Composite for food a; Basic dynamic load rating C:21.6 kN; L:164 mm; Recommended tightening torque for grub screw:6.5 N·m; d:34.925 mm; Limiting speed:3200 r/min; B:42.9 mm; J:126 mm; Hexagonal key size for grub screw N:3.969 mm; Basic static load rating C0:15.3 kN; Recommended diameter for attachment bolts, inch G:0.5 in; |
| K525377R Timken Tapered Roller Bearings | G1:14 mm; Mass withdrawal sleeve:0.95 kg; G:M 145x2; d:140 mm; d1:135 mm; Hydraulic nut:HMV 29 E; B1:83 mm; B2:93 mm; |
| K15841 Timken Tapered Roller Bearings | P120°:94.3 kN; PG:1/4 NPT; P180°:107 kN; PosiTrac Plus contact element (db shaft position):B10724-125; db:134.938 mm; H:257.175 mm; S:4.763 mm; Cap bolt:5/8-11 UNC; R2:30.163 mm; ba:53.181 mm; H2:53.975 mm; Ca:67.793 mm; P150°:87.2 kN; R1:79.375 mm; Stabilizing ring:SR-24-20; h:46.831 mm; H1:133.35 mm; Cap bolt, SAE grade:8; Initial grease fill:765.45 g; da:120 mm; |
| 15112/15251D Timken Tapered Roller Bearings | Specific static load factor K0:300 N/mm²; dk:73.025 mm; Basic dynamic load rating C:224 kN; r2 min.:1 mm; Material constant KM:330; Da min.:72.4 mm; D:80.963 mm; b1:5 mm; rb max.:1 mm; da min.:55.1 mm; Design (sliding contact surface combination):Steel/steel; Mass plain bearing:0.93 kg; r1 min.:0.6 mm; B:44.45 mm; Basic static load rating C0:670 kN; b:4.8 mm; da max.:57.9 mm; ra max.:0.6 mm; d:50.8 mm; |
| JM466410D Timken Tapered Roller Bearings | PG:1/4 NPT; Cap bolt recommended tightening torque:298.3 N·m; R1:58.737 mm; End plug (suffix Y):EPR 15; H:222.25 mm; P60°:175 kN; J1:60.325 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt, SAE grade:8; Housing:FSAFS 520; h:42.069 mm; J min.:295.275 mm; A2:155.575 mm; R2:30.163 mm; P180°:71.2 kN; ba:44.45 mm; Cap bolt:5/8-11 UNC; S:4.763 mm; P150°:58.7 kN; PosiTrac Plus contact element:2 x B10724-102; |
| NA97450/97901D Timken Tapered Roller Bearings | Specific dynamic load factor K:100 N/mm²; Material constant KM:330; Basic static load rating C0:270 kN; B:35 mm; r1 min.:0.6 mm; Basic dynamic load rating C:156 kN; d2 max.:114 mm; d:50 mm; h1:160 mm; l4 max.:219 mm; l3 min.:68 mm; Mass rod end:4.1 kg; C1 max.:31 mm; dk:66 mm; w:60 mm; l7 min.:60 mm; α:6 °; l5 ≈:30 mm; G:M 45x3; d4 ≈:70 mm; |