| 2TDIGW Timken Tapered Roller Bearings | dk:29 mm; G:M 20x1.5; Mass rod end:0.32 kg; C1 max.:13.5 mm; l2 max.:107 mm; l7 min.:24 mm; d:20 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; Basic static load rating C0:42.5 kN; l1 min.:43 mm; r1 min.:0.3 mm; d2 max.:54 mm; α:9 °; h:78 mm; B:16 mm; Basic dynamic load rating C:30 kN; |
| K16814 Timken Tapered Roller Bearings | H:124 mm; A1:15 mm; Mass bearing unit:0.3 kg; Fatigue load limit Pu:0.335 kN; Db:65 mm; A:30 mm; L:70 mm; Hexagonal key size for grub screw N:3.175 mm; N:12.3 mm; d:25.4 mm; Housing material:Composite for food a; A5:26 mm; Basic static load rating C0:7.8 kN; Thread grub screw G2:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended tightening torque for grub screw:4 N·m; |
| 43096/43319D Timken Tapered Roller Bearings | Mass rod end:7.9 kg; d:70 mm; h:235 mm; Material constant KM:330; Basic static load rating C0:490 kN; r1 min.:1 mm; Specific dynamic load factor K:100 N/mm²; G:M 56x4; dk:92 mm; l1 min.:125 mm; B:49 mm; d2 max.:162 mm; l7 min.:85 mm; C1 max.:43 mm; Basic dynamic load rating C:315 kN; α:6 °; l2 max.:319 mm; |
| NA53176/53390D Timken Tapered Roller Bearings | Grease Speed Rating Open/Shielded n1:8500 rpm; B:23.00 mm; Accessories:One Seal; Fillet Radius ra:1.50 mm; D:90.0000 mm; Basic Static Radial Load Rating Co:23600 N; Basic Dynamic Radial Load Rating C:43600 N; d:30.000 mm; Sealed Speed Rating n3:5600 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; |
| K518335R Timken Tapered Roller Bearings | Basic static load rating C0:23.2 kN; Thread grub screw G2:3/8-24 UNF; Fatigue load limit Pu:0.98 kN; d:49.212 mm; B4:9 mm; D:90 mm; B:51.6 mm; s1:32.6 mm; Basic dynamic load rating C:35.1 kN; C:22 mm; Calculation factor f0:14; Limiting speed1):800 r/min; d1 ≈:62.51 mm; Recommended tightening torque for grub screw:16.5 N·m; Mass complete bearing:0.77 kg; r1,2 min.:1 mm; Hexagonal key size for grub screw N:4.763 mm; |
| K161769W Timken Tapered Roller Bearings | RG:3/8 NPT; Housing:FSAF 517; P150°:20.9 kN; J min.:250.825 mm; Mass pillow block:17.9 kg; PosiTrac Plus contact element:2 x B10724-53; H1:95.25 mm; P120°:23.1 kN; Da:150 mm; Ca:45.796 mm; Stabilizing ring:SR-17-14; PG:1/8 NPT; L:330.2 mm; h:34.925 mm; J1:53.975 mm; Labyrinth ring:2 x LOR 51; End plug (suffix Y):EPR 9; P60°:61.4 kN; Appropriate attachment bolt size G:0.625 in; P180°:25.4 kN; |
| HM265010CD Timken Tapered Roller Bearings | Dimension S1:0.8750 in; Pin Dia BS:3/8; Dimension L:3.2500 in; Weight W:1.00 lb; Diameter G:0.4063 in; Basic Dynamic Radial Load Rating:3510 lbf; Width A:1.0625 in; Dimension B:5.4375 in; Distance J:1.8750 in; Dimension F:0.5000 in; Basic Static Radial Load Rating Co:2520 lbf; Dimension N:0.3906 in; Shaft Diameter D:1 3/16 in; Insert Bearing IB:Stainless Steel; Dimension C:2.0625 in; Distance H:1.250 in; |
| NA759/752D Timken Tapered Roller Bearings | D1 ≈:418 mm; Comparative axial load rating CFa:217 kN; D:469.9 mm; Mass bearing:98 kg; d1 ≈:355.6 mm; Thrust factor K:1.73; Calculation factor Y0:2; B:231.775 mm; Design variant/feature:TDIE/Y2; r1,2 min.:1.6 mm; Fatigue load limit Pu:465 kN; Basic static load rating C0:5700 kN; Calculation factor Y1:2; r3,4 min.:3.3 mm; Calculation factor Y2:3; Basic dynamic load rating C:2642 kN; Comparative radial load rating CF:655 kN; |
| HM231149NA/HM231116D Timken Tapered Roller Bearings | Ca:49.809 mm; h:38.1 mm; Stabilizing ring:SR-18-15; Da:160 mm; PG:1/8 NPT; Cap bolt:1/2-13 UNC; Labyrinth ring:2 x LOR 189; R2:27.781 mm; H2:41.275 mm; P180°:64.9 kN; da:82.55 mm; End plug (suffix Y):EPR 11; Cap bolt recommended tightening torque:149.1 N·m; P60°:157 kN; Initial grease fill:141.75 g; J1:53.975 mm; Max. speed for PosiTrac Plus seal:1800 r/min; N1:19.05 mm; Appropriate attachment bolt size G:0.625 in; |
| K518771R Timken Tapered Roller Bearings | Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7 m/s; D:95 mm; Specific static load factor K0:120 N/mm²; Tolerance shaft:f7 m/s; Mass bushing:0.53 kg; Permissible sliding velocity v max.:1 m/s; d:90 mm; B:90 mm; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:40 N/mm²; |