| NA48385/48320D Timken Tapered Roller Bearings | Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Dynamic Radial Load Rating C:76100 N; D:120.0000 mm; Sealed Speed Rating n3:4000 rpm; B:29.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:45000 N; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:7000 rpm; d:45.000 mm; |
| K161252G Timken Tapered Roller Bearings | d:10.000 mm; B:14.3 mm; Accessories:No Shield, no Seal; Oil Speed Rating n2:22000 rpm; Sealed Speed Rating n3:16000 rpm; Basic Static Radial Load Rating Co:4300 N; D2R:28.2 mm; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:7610 N; D:30.0000 mm; Grease Speed Rating n1:16000 rpm; |
| M667911D Timken Tapered Roller Bearings | P150°:85.9 kN; L:511.175 mm; Housing:SAF 034 KA; Cap bolt recommended tightening torque:400 N·m; PG:1/4 NPT; P60°:249 kN; P90°:149 kN; R1:87.313 mm; h:43.656 mm; Eye bolt:3/8-16 UNC; A1:149.225 mm; Mass pillow block:63.9 kg; H2:60.325 mm; Labyrinth ring:2 x LOR 139; Pa:34 kN; ba:64.294 mm; J1:85.725 mm; R2:38.1 mm; da:149.225 mm; Initial grease fill:481.95 g; |
| K161690W Timken Tapered Roller Bearings | Da max.:450 mm; r1,2 min.:7 mm; db min.:388 mm; d1 ≈:407.715 mm; Cb min.:22 mm; Reference speed:850 r/min; C:38.1 mm; Mass bearing:26.5 kg; B:55.56 mm; Db min.:447 mm; r3,4 min.:7 mm; T:60.32 mm; d:355.65 mm; Calculation factor e:0.48; ra max.:6.6 mm; Basic dynamic load rating C:572 kN; Basic static load rating C0:1200 kN; Fatigue load limit Pu:98 kN; Calculation factor Y:1.25; rb max.:6.6 mm; |
| K160566 Timken Tapered Roller Bearings | Static axial stiffness, preload class B:117 N/µm; Ball diameter Dw:6.35 mm; da min.:34.6 mm; d1:38.2 mm; ra max.:1 mm; Preload class C GC:480 N; r1,2 min.:1 mm; C1:3.7 mm; Attainable speed for oil-air lubrication:65000 r/min; d2:36.4 mm; Preload class A GA:80 N; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) Y2:0.87; Reference grease quantity Gref:1.7 cm³; |
| K166963 Timken Tapered Roller Bearings | Limiting speed:2800 r/min; Fw:160 mm; Ew:170 mm; Basic static load rating C0:510 kN; Basic dynamic load rating C:145 kN; Mass needle roller and cage assembly:0.55 kg; U:46 mm; Fatigue load limit Pu:56 kN; Reference speed:2600 r/min; |
| 43112/43319D Timken Tapered Roller Bearings | R2:33.337 mm; h:52.388 mm; P90°:136 kN; H1:169.875 mm; R1:104.775 mm; Labyrinth ring:2 x LOR 148; Eye bolt:2 x 3/8-16 UNC; ba:68.263 mm; Initial grease fill:793.8 g; P60°:226 kN; P150°:78.3 kN; P180°:94.3 kN; Housing:SAF 036 KA; RG:3/4 NPT; Cap bolt, SAE grade:5; P120°:85.9 kN; End plug (suffix Y):EPR 19; PosiTrac Plus contact element:2 x B10724-148; Max. speed for PosiTrac Plus seal:875 r/min; |
| K163909 Timken Tapered Roller Bearings | Basic Static Radial Load Rating Co:32500 N; Basic Dynamic Radial Load Rating C:39300 N; D:85.0000 mm; Accessories:Two Shields; B:19.00 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; d:45.000 mm; |
| NA53176/53376D Timken Tapered Roller Bearings | RG:3/8 NPT; Stabilizing ring:SR-20-17; H:222.25 mm; Taconite seal:TER 185; A2:231.775 mm; P90°:56.5 kN; PG:1/8 NPT; End plug (suffix Y):EPR 10; P180°:38.3 kN; P150°:32 kN; Initial grease fill:181.44 g; Cap bolt:2 x 3/4-10 UNC; J max.:333.375 mm; P120°:35.6 kN; Da:180 mm; P60°:94.3 kN; Cap bolt recommended tightening torque:515.2 N·m; Pa:15.3 kN; Max. speed for Taconite seal:1050 r/min; |
| NP835117 Timken Tapered Roller Bearings | Dynamic (Cr):4.5 mm; with tapered bore:3 000 min-1; D:160 mm; d:75 mm; B:55 mm; rs (min):2.1 mm; Grease:489 kN; Static (Cor):8.3 mm; with cylindrical bore:2 300 min-1; Pu:396 kN; Oil:56.460 kN; |